-------------------------------------------------
Quake2X-LE - Quake2 for Xbox Lantus Edition V1.00
-------------------------------------------------
This is Quake2 for Xbox consoles ported from Quake2Forge sources.
The distribution comes with the shareware PAK file to get you started.
Disclaimer: Repi already ported Quake2 over 2 years ago. However I
felt there were some things missing in his port so I decided to make my own.
Repi's port contains hardware rendered graphics, which look far superior
to Quake2x-LE which uses SDL based software renderer. The choice is yours.
--------------------
Features
--------------------
- Full singleplayer
- Full multiplayer support
- Mod Menu for expansion paks/TC's etc
- Gamepad/Mouse/Keyboard support.
- Customizable inputs
- PAL60 support
- CDDA audio.
- Uses SDLx
- Source code released
-------------------------
Currently not implemented
-------------------------
- Hardware rendering
- Rumble support
--------
Controls
--------
Fire Right trigger
Jump Left trigger
Crouch Left thumb
Next weapon DPad up
Prev weapon DPad down
Walk Left stick Y
Strafe Left stick X
Look up/down Right stick Y
Look left/right Right stick X
Inventory left Dpad Left
Inventory right Dpad Right
Inventory use Right thumb
Controls can be customized via the 'Options' menu, and
by editing your config.cfg files.
------------------------
Advanced Control Editing
------------------------
The following settings are to adjust analog sticks:
set j_strafe "<axis number>"
set j_throttle "<axis number>"
set j_ud_axis "<axis number>"
set j_lr_axis "<axis number>"
where axis number can be:
0 = left stick left/right
1 = left stick up/down
2 = right stick left/right
3 = right stick up/down
To alter look sensitivity use:
set m_pitch "<new value>"
set m_yaw "<new value>"
----------
Misc
----------
Screen position and size can be modified by opening up
the Quake2 console and modifying the following values:
set vid_xbox_ystretch "0"
set vid_xbox_xstretch "0"
set vid_xbox_ypos "0"
set vid_xbox_xpos "0"
-------
Netplay
-------
Quake2x-LE supports full online play. If you dont have a keyboard
to enter IP addresses in the game. Open up your config.cfg file
and add IP addresses of your favorite quake2 servers in the following:
set adr8 "<ip goes here>"
set adr7 "<ip goes here>"
set adr6 "<ip goes here>"
set adr5 "<ip goes here>"
set adr4 "<ip goes here>"
set adr3 "<ip goes here>"
set adr2 "<ip goes here>"
set adr1 "<ip goes here>"
set adr0 "<ip goes here>"
when you restart Quake2x-LE you will be able to connect to your servers.
Quake2 server list can be found at http://www.gameaholic.com/servers/quake2/
Support over XLink/KAI should work fine. However this is untested at this time.
-------------
Notes on CDDA
-------------
CDDA audio works fine, however expect a slight drop
in framerates since there is a performance hit associated
with streaming audio as it requires CPU time.
----------------
Contact Info
----------------
http://www.lantus-x.com/ClassicX
http://www.lantus-x.com/SDLx
email: [email protected]
----------------
Credits & Thanks
----------------
ID Software, Sam Lantinga, Iriez & Xbins
|